A look at what pressure can do.
Read More
In recent weeks we have been made aware of several instances in which pull back chains or ropes failed whilst tripping a drill string.
Read More
A reverse circulation (RC) driller suffered an eye injury when a flying rock chip impacted his eye.
Read More
Whilst towing a trailer-mounted core drilling rig up a ramp of an open cast mine, the “A” frame of the trailer snapped, resulting in the drill rig rolling backwards, down the ramp where it came to rest against a retaining wall.
Read More
Have a look at some of the industry incidents we have been made aware of in recent weeks.
Read More
We all need to watch and learn from this dramatic accident.
Read More
Read about this tragic fatality involving a pipe wrench.
Read More
The toes of the left foot of the drill rig assistant were amputated by the rotation head of a diamond core drilling machine as it travelled down the feed frame.
Read More
On 27th August 2011, a stable 3 metre rod exploded while the driller was pumping water into the drill hole before commencement of drilling. The exploded rod scattered around the drill site (15m away from the rig).
Read More
The rod clamps on an exploration drill rig closed down onto the foot of a driller’s off-sider. Fortunately the off-sider did not sustain serious injuries as he was wearing steel capped boots.
Read More
A driller had his feet crushed when drill rig foot clamps unexpectedly closed.
Read More
A high-pressure air hose burst on a surface exploration drill rig while the driller was attempting to clear a blockage in the hose.
Read More
A Driller was fatally injured on a drill site in the Rustenburg area when he was struck on the head by a drill rod that had failed whilst drilling.
Read More
There have been several related incidents of diesel fuel fires occurring on mobile plant while they were being refuelled.
Read More
A blast hole drill rig mast was being lowered from the vertical to horizontal position. Its top end was about 1 metre from its horizontal resting position when a bearing block capping bolt failed.
Read More
A drill rig assistant suffered a blow to the head and an injured knee when the drill rod he was helping to support suddenly fell to the ground.
Read More
Hydraulic fluid burst through the wear spot on the hose and injected through the double gloves into the fitter’s index finger. Major surgery was required to track and remove the injected hydraulic fluid from the fitter’s finger and hand.
Read More
While pulling drill rods the “D” Shackle used to connect the hoist rope to the hoist plug failed catastrophically.
Read More
The injured man inserted his arm into the cyclone to clear the blockage and while his arm was still in the cyclone, the Driller closed the cover plate.
Read More
As the pedal depressed it opened the foot clamp and released the drillstring which fell into the hole causing the hoisting plug to hit the top of the clamp. The force with which the hoisting plug hit the foot clamp caused the foot clamp pedal to lift very abruptly.
Read More